15HP Gasoline Powered Wood Chipper Mulcher with Electric Start
This model DR-CS-15HP wood shredding machine with pull start gasoline engine 15HP chips branches up to 4.7 inches in diameter, and is ideal for shredding leaves and debris. With an adjustable deflector vane on the side discharge chute, the results can be easily collected to collection bags or other vehicles. It weighs 385 pounds and comes with large wheels for easy transport around your home and yard. This unit comes with a 1-year warranty.
1. Light Weight and Compact Design
The whole machine has a light weight of 385 pounds. This makes it much easier to be stored in a shed or workshop, maneuver around the yard or load into a vehicle for transport.
2. 14-inch Wheels for Maximum Portability and Road Towing
Includes trailer hitch and 2 pieces of quality wheels for maneuvering and towing. The tires are 14" in diameter with 23" wheel base.
3. Powerful Gasoline Engine 420CC 15HP with Advanced Centrifugal Clutch and Automatic Low-oil Shutdown
Employs a powerful 420CC 15HP petrol engine in pull start (recoil start). It makes reducing woods, branches or garden waste a quick and easy process. This chipper is equipped with safety mechanism centrifugal clutch and automatic low-oil shutdown to protect the engine.
4. Twin Reversible Chipping Blades in Hardened Steel
Employed are twin reversible chipping blades. They are made of high quality hardened steel, selected for its toughness, and are heat treated for wear resistance.
5. Chipping Capacity for Limbs and Branches
Our unit is capable of devouring branches up to 4.7 inches in diameter. It’s ideal for shredding leaves, debris, twigs, limbs, sticks, bushes, woods, branches and garden wastes.
6. Consistent and Uniform Results
Cycle shredding system ensures consistent and uniform results when chipping woods, approximately 10mm*10mm*3mm.
7. Adjustable Discharge Chute
Our chipper discharges processed material out of a side discharge on the unit. The unit comes with an adjustable deflector vane which can rotate a 180 degrees.
8. Big Top Hopper with 550mm*450mm Opening
The unit has a large hopper on the top to allow easy loading of leaves and small branches into the machine for shredding. The opening at the top of the hopper is 21" long and 18" wide; so you can easily deposit small woods, branches and debris for processing. The opening at the base of the hopper narrows to 8" long x 4.7" wide
9. 2 Pieces of Quality V-Belts
To transfer power, there are 2 pieces of quality V-belts. They are of durable and unlikely to break.
10. Protection during Operation
Safety has always been one of our major concerns in design of our machines. There is a plastic baffle in the entrance to prevent finished chips popping and hurting operators.
12. Minimal Assembly Required
For shipping purposes, the shredder hopper, chipper cone and discharge chute are packed separately. There are only a few screws and nuts to install to finish assembling our unit. Assembly is very simple and typically takes around 30 minutes. Detailed instructions are provided.
13. Strict Quality Control and 1-Year Warranty
We provide a high standard of quality control and manufacturing. The unit comes with 1-year warranty. Small accessories will be offered for free if in the unlikely event that they failed.
14. CE Certified
Our machine has passed the CE Certification. It's safe and reliable in operations.
Adaptability - Leaves, debris, twigs, limbs, sticks, bushes, branches and garden wastes
Blade Material - Hardened steel with wear resistance
Blade Speed - 2200rpm
Belts - 2pcs of quality V-belts
Chipping Blades - Twin reversible chipping blades
Chipping Capacity - 4.7 inches
Dimensions - 5.9' x 2.6' x 3.8' Feet
Adjustable Discharge Chute - With adjustable deflector vane in 180 degrees
Engine - 420CC 15HP Loncin gasoline engine
Engine Brand - Loncin
Engine Oil - 1.1L
Fuel - Gasoline
Fuel Consumption - 450ml/h
Fuel Volume - 6.5L
Maneuvering & Towing - Available on 2 quality wheels
Minimal Assembly Available
Net Weight 175.0kg
Packing Plywood box
Processed Chips - 10mm*10mm*2mm
Productivity - 3 tons/h (max)
Rotor Speed - 3600rpm
Safety Mechanism - Centrifugal clutch, Automatic low-oil shutdown, Plastic barrier to prevent chips popping and hurting operators
Shipping Weight 185.0kg
Start Type - Pull start and electric start included. (with battery)
Top Hopper 550mm*450mm opening and 200mm*120mm base
Warranty 1 year
Wheels 2pcs: 370mm in diameter, 580mm wheel base